SUPPORT
Knowledgebase
UPCOM Technologies > UPCOM Support > Knowledgebase

Ask a question:


Configuring the UC-IRD+ Management Port

Solution This will allow you to configure the Ethernet management port on the UC-IRD+.

Operations Sequence:
Click �ENTER� to enter the �System� menu, select �Local Setup� then click �ENTER�. The display will show something like this:

There are 3 options to setup on this menu.

IP Address: Set the IP address for the management port.
Network Mask: Set he network mask for the IP address assigned to the equipment.
Gateway: Set the Default Gateway for the IP address assigned to the equipment.
 
Was this article helpful? yes / no
Article details
Article ID: 6
Category: UC-IRD+
Date added: 2012-01-19 14:55:14
Views: 4539
Rating (Votes): Article rated 2.9/5.0 (100)

 
<< Go back

Powered by Help Desk Software HESK™