UPCOM Technologies > UPCOM Support > Knowledgebase

Ask a question:

» Category: UC-IRD+  (Go back)

» Articles in this category:

UC-IRD+ SETTING BISS Article rated 3.0/5.0
Follow this procedure once you have setup the input on your UC-IRD+ and you already have “Tuner Lock” on green. Procedure for BISS setup: 1. Press <ENTER> 2. Press the < > or < ...
UC-IRD+ MENU STRUCTURE Article rated 3.0/5.0
Setting up the Web Interface User and Password Article rated 2.9/5.0
This procedure must be done through the front panel and will allow you to configure the Web Interface on the UC-IRD+. Note: Please make sure you already configured the Management Port IP address a...
Setting Up Ethernet Inbound on UC-IRD+ Article rated 3.0/5.0
This menu allows you to configure the TS/IP port as input if activated on System->Optional Function. The parameters must be known before starting. (Please contact your stream provider if you don’t ...
I receive the audio but no video, it is black Article rated 3.0/5.0
The most probable cause of this problem is that the program is a 4:2:2 chroma subsampling program. Our UC-IRD+ only supports 4:2:0. There is no work around to this problem.
Configuring the UC-IRD+ Management Port Article rated 3.0/5.0
This will allow you to configure the Ethernet management port on the UC-IRD+. Operations Sequence: Click “ENTER” to enter the “System” menu, select “Local Setup” then click “ENTER”. The display w...

Powered by Help Desk Software HESK™